xTool X1 60W MOPA Galvo Source
xTool X1 60W MOPA Galvo Source
A powerful 60 W MOPA laser source for the xTool X1, designed for advanced metal processing, colour marking, fine engraving and relief applications. Requires the xTool X1 20W Diode Galvo Module.
Order online or book a personal demonstration in our showroom.
Delivery
Delivery SK / CZ / EU
Service and support
Service and support
Accessories and advice
Pre-purchase advice
Key benefits
The MOPA source (1064 ± 5 nm) lets you set the pulse length over a wide range of 2–500 ns and the frequency from 1 to 4,000 kHz. This allows it to handle more demanding metal applications – colour and deep engraving, embossing and cutting thin metals. It connects via Laser Swap™ and works through the galvo head of the 20W Diode Galvo module.
Wider pulse settings
A pulse length of 2–500 ns and a frequency of 1–4,000 kHz give you more options than a standard fiber source to tailor the result to the material.
Colour metal engraving
According to xTool, colour metal engraving even on the X1's large format.
Deep relief and embossing
Deep and relief engraving on an area of up to 415 × 225 mm. An embossing extraction kit is included.
Cutting thin metals
For cutting metal, the supplied narrow-aperture lens cover is used. According to xTool, faster and more versatile processing than the 30W Fiber.
What the source is designed for
Colour engraving of metals, deep relief and embossing, cutting thin metals, stainless steel, leather and demanding metal applications where speed and precision matter.
Results depend on the specific material and settings. You will find recommended parameters in the xTool Studio software.
Which machine it is for
xTool X1
The source is designed exclusively for the xTool X1. It requires an installed 20W Diode Galvo module, which is included in the X1 CO₂ + Diode Galvo version. For the X1 Single CO₂ version, the module must be purchased separately. Only one external source (UV, Fiber or MOPA) is mounted on the back of the X1 at a time.
xTool X1 60W MOPA Galvo Source – technical data
What's in the box
According to the official xTool manual.
- 60W MOPA galvo source
- Power adapter (24 V, 14.5 A)
- Power cable
- Narrow-aperture lens cover (for cutting metal)
- Embossing extraction kit
- Knurled-head screws
- Optical window
- Steering mirror
- Connection cable
- Screws
- Screwdriver
- Optical window installation tool
- Calibration card
- Laser calibration tool
- User manual
Questions and answers
Can I use the MOPA source without the 20W Diode Galvo module?
No. The MOPA source only provides the laser source – the 20W Diode Galvo module must be installed on the xTool X1 to process material.
When should I choose MOPA instead of the 30W Fiber?
If you need colour metal engraving, deep relief, thin metal cutting or higher efficiency for more demanding metal applications. For everyday metal marking, the 30W Fiber is sufficient.
Can I have several sources connected at once?
Only one external galvo source (UV, Fiber or MOPA) is mounted on the back of the X1 at a time. The sources can be swapped as needed.
We'll help you with X1 accessories
Not sure whether an accessory is right for your work? Get in touch – we will help with selection, installation and service.
