xTool P3 All-in-One Bundle
xTool P3 All-in-One Bundle
The most complete set for the P3: the enclosed 80W CO₂ laser with a mobile work stand, the intelligent feeder (150 cm) for long materials, the RA3 rotary attachment for cylindrical objects and the SafetyPro AP2 Max air purifier. The delivery also includes a CO₂ cylinder for the fire suppression system (a gift according to xTool's current offer); the 5W IR module is not included in the bundle.
Do you have a question about the product or need to check whether it is right for you? We will be happy to advise you.
Delivery
Delivery SK / CZ / EU
Service and support
Service and support
Accessories and advice
Pre-purchase advice
Talk to us before buying the xTool P3
We do not currently have the xTool P3 in our showroom. We will be happy to offer a consultation and a comparison with the available MONOR CO₂ machines, so you can choose a machine that fits your work, materials and budget.
Tell us what you want to work with – we will help you choose the machine and accessories.
xTool P3 80W or MONOR 7050 80W?
Both machines are 80W CO₂ lasers – they differ in design, automation and type of use. Below you will find a comparison based on actual specifications and practical use.
xTool P3 80W
An automated enclosed CO₂ laser with the ACS workflow
- Working area 914 × 457 mm, 80 W of power, speed up to 1,200 mm/s
- Enclosed Class 1 design, four cameras, LiDAR autofocus and the AutoLift base with material height up to 220 mm
- Integrated water cooling and ACS – automatic positioning and focusing without manual adjustment
- Ready for creative work and smaller production – in this bundle with a stand, feeder and rotary attachment
MONOR 7050 80W
A professional gantry CO₂ laser for workshops and production
- Working area 700 × 500 mm, 80 W of power, RUIDA control system
- Equipment for workshop use: knife and honeycomb tables, air assist, extraction with run-on and CW3000 cooling
- Customisable workflow and on-site installation with training
- Service and expert support in Slovakia
Mobile Work Stand for the P3
A steel mobile stand made to measure for the xTool P3 with lockable casters (360° swivel, quiet, floor-friendly). According to xTool, it holds up to 200 kg (441 lb), so it is suitable for the 105 kg machine.
The hollow design helps dissipate heat from the cooling unit and the machine's bottom plate and makes moving easier – according to xTool, one person can move the machine on the stand.
Intelligent Conveyor Feeder (150 cm)
The intelligent feeder automatically clamps the material, returns it to the home position by itself and shows a preview of the entire material before processing – suitable for long pieces and repeat production.
The standard set (labelled 150 cm) supports material up to 610 × 1,500 mm – so 150 cm is the maximum material length, not its width. The material can be up to 26 mm thick, with a feed speed of up to 200 mm/s; according to xTool, no support tables are needed with the standard rails.
The Conveyor Rail (69 cm) is an optional extension and is not needed for the standard 150 cm. According to xTool, each set extends the supported material length by 50 cm (up to 5 m) and is used only with the P3 feeder. According to xTool, with the feeder the machine is a Class 4 device.
xTool RA3 – rotary attachment (Smart MagSwap™)
The RA3 rotary attachment rotates the material under the laser, so you can engrave cylindrical and round objects around their entire circumference – glasses, tumblers, bottles, rings, spheres and other compatible round products.
According to xTool, on the P3 the RA3 uses 360° LiDAR mapping with mode recognition and 3D preview, batch processing and tool-free swapping of holders (MagSwap™). The P3 specifications state rotary engraving for diameters of 0 – 200 mm.
xTool SafetyPro AP2 Max – air purifier
The SafetyPro AP2 Max is the industrial version of the AP2 purifier, designed according to xTool for powerful machines such as the P3: it has more than 4.6× higher airflow (up to 700 m³/h), an additional formaldehyde filter and 4× larger filter capacity. It is not the smaller AP2 purifier.
It captures smoke and fine particles produced during laser processing and helps keep the work area cleaner and with less odour around the machine – useful for longer runs and in an enclosed workshop.
The purifier reduces smoke and particles, but it does not replace ventilation of the room or following the manufacturer's instructions. The filters must be checked regularly and replaced as needed.
Key benefits of the xTool P3
The P3 combines a powerful 80W CO₂ laser with ACS automation, which simplifies everyday work – from positioning and focusing to setting the material height.
Integrated AutoLift base
The motorised base automatically sets the material height to the correct focus. It provides up to 220 mm of height for bulky objects, without manual adjustment.
ACS – Automated Creation System
Place the material, close the lid and the machine takes care of the rest: automatic positioning, LiDAR distance measurement and focusing with AutoLift.
Four cameras
The SkyView panoramic 16 MP camera, a close-range camera and two side cameras. Full-area preview, precise design placement (0.2 mm accuracy) and job progress monitoring.
Interchangeable focus lenses
The standard M lens (0.15 × 0.18 mm laser spot) is designed for versatile use. xTool offers optional S and L lenses for detailed engraving and thicker cuts.
Integrated cooling
The built-in inverter water cooling unit supports stable laser performance under varying ambient conditions. Antifreeze is included in the package.
Intelligent feeder (included)
The included Intelligent Conveyor Feeder (150 cm) makes it possible to process long materials – up to 1,500 mm with the standard rails, and according to xTool up to 5 m with additional rails.
80W CO₂ and optional 5W IR laser
The P3 works with an 80W CO₂ laser. For direct engraving of metals and plastics, xTool offers an optional 5W IR module, which is sold separately.
80W CO₂ laser (part of the machine)
Cutting and engraving wood, plywood, acrylic, leather, textiles, paper and cardboard; engraving glass, bamboo and ceramics. The beam source is an 80W CO₂ laser with a wavelength of 10,600 nm. The CO₂ cylinder belongs only to the fire suppression system – it is not the laser source.
5W IR laser (optional module)
Direct engraving and marking of metals (for example stainless steel, aluminium) and plastics. The module connects via the expansion port on the laser head and is not included in this bundle – it is sold separately.
What the CO₂ cylinder is for
The CO₂ cylinder (0.6 l) is not the laser source. It is used by the integrated fire suppression system: when a flame is detected, it releases CO₂ and extinguishes the fire. The machine has built-in flame sensors and a fire suppression module.
According to xTool's current offer, the cylinder is added to the P3 as a gift and is part of our delivery; otherwise, according to xTool, it is sold separately and is not included as standard (due to restrictions on shipping dangerous goods). Without an installed cylinder, active CO₂ fire suppression is not available.
Materials and sample results
Cutting and engraving are two different operations – when engraving, the laser marks the surface; when cutting, it goes through the entire material. Below are sample projects and what the P3 can do.
Wood and plywood
Cutting and engraving wood and plywood. The right settings depend on the type and thickness of the material; for thicker plywood, xTool warns of a fire risk, so always test new materials first and never leave the machine unattended.
Acrylic
Cutting and engraving acrylic in all colours – clear, translucent, mirrored and coloured.
Leather and textiles
Cutting and engraving genuine, synthetic and eco leather as well as fabrics (cotton, polyester, nylon, silk, linen).
Paper and cardboard
Cutting and engraving paper, cardboard, cork, EVA foam and felt – suitable for prototypes, packaging, decorations and paper designs.
Glass (engraving only)
The P3 only engraves glass; it does not cut it. You can engrave, for example, sheet, insulating or frosted glass; glass that is too hard or too thin may crack, so we recommend testing first.
Metal (engraving)
Metal can only be engraved. The CO₂ laser handles painted metal and anodised aluminium; direct engraving of stainless steel and aluminium requires the optional 5W IR module (not included in this bundle).
Four cameras and precise positioning
The SkyView panoramic 16 MP camera and the close-range camera capture the material once the lid is closed; two side cameras monitor the job.
Full-area preview
Once the lid is closed, the machine scans the entire working area by itself, and you place the design directly in the software on the live image of the material.
Precise placement
The close-range camera positions with 0.2 mm accuracy, so the design sits exactly where you need it.
Progress monitoring
Two side cameras show the job from the front and side and, together with the sensors, contribute to safety detection.
LiDAR autofocus and AutoLift
LiDAR measures the distance to the material surface and the AutoLift base brings it into focus – without manual measuring.
Working area and machine design
An enclosed machine with a large working area, the integrated AutoLift base and built-in cooling.
Working area
914 × 457 mm. Maximum speed 1,200 mm/s, X-axis acceleration 19,600 mm/s².
Material height
Up to 220 mm thanks to the integrated AutoLift base (180 mm in automatic mode).
Dimensions and weight
1,250 × 780 × 496 mm, weight 105 kg.
Long materials
With the standard rails, the included feeder supports material up to 610 × 1,500 mm; additional rails are sold separately.
xTool Studio
The P3 is controlled via the xTool Studio software for Windows and macOS. You can connect it via USB or Wi‑Fi. The software brings everything you need together in one place:
- graphic design and design editing,
- laser parameter settings for different materials,
- positioning the design based on the camera image,
- machine control and starting the job.
Supported formats: SVG, DXF, JPG, JPEG, PNG, BMP, TIF.
Enclosed Class 1 design and smoke extraction
The xTool P3 is certified as a Class 1 laser machine (the 80 W working laser is in an enclosed housing). Safety is complemented by 8 infrared flame sensors, a temperature sensor, side cameras and an integrated CO₂ fire suppression system (the CO₂ cylinder is sold separately). According to xTool, when used with the feeder the machine becomes a Class 4 device.
The machine does not have a built-in exhaust fan – the package includes the SafetyPro IF2 2.0 inline fan for venting smoke outside. As an air purifier, xTool recommends the SafetyPro AP2 Max. The cooling requires antifreeze, which is included in the package.
Expand your xTool P3
The stand, feeder, RA3 rotary attachment and AP2 Max purifier are already included in the bundle. Below is only the optional feeder extension for longer materials.
xTool P3 feeder rails – Conveyor Rail 69 cm
Optional extension for the included feeder for longer materials – not needed for the standard 150 cm. According to xTool, each set extends the maximum supported material length by 50 cm (up to 5 m) and is used exclusively with the P3 feeder. The set contains 4 rails, 8 legs and 2 beams.
xTool P3 All-in-One Bundle – technical data
What's in the box – xTool P3 All-in-One Bundle
The bundle includes the xTool P3 machine, the mobile work stand, the intelligent feeder (150 cm), the RA3 rotary attachment, the SafetyPro AP2 Max purifier and a CO₂ cylinder (a gift according to xTool's current offer). You will also find the machine's standard accessories below. The 5W IR module is not included in the bundle.
xTool P3 (machine)
Mobile Work Stand
Intelligent material feeder (150 cm)RA3 rotary attachment
CO₂ cylinder for the fire suppression system (gift)SafetyPro AP2 Max air purifier
Power cable
USB cable
Antifreeze
Funnel
Material clamp
Masking tape
Cardboard
Basswood 3 mm
Exhaust hose (part 1)
Safety instructions
Quick start guide
SafetyPro IF2 2.0 inline fan
Ribbed plastic wall plugs
M3×10 screws
Exhaust hose (part 2)
Wall mounting bracket
2 mm hex key
Key
Double-ended screwdriver
1.5 mm hex key
3 mm hex key
M3×6 screw
M3×5 screws
M4×10 screws
M3×10 screws (countersunk)
ST2.9×9.5 self-tapping screwsxTool P3 on video
The official xTool video introducing the xTool P3. The video plays directly on this page.
The questions you ask us most often
Which materials can the xTool P3 handle?
It can cut wood, acrylic, textiles, leather and other suitable materials. In addition, it can engrave metal, glass, bamboo and ceramics. Direct engraving and marking of metals and plastics (e.g. stainless steel, aluminium) is possible with the optional 5W IR module. The achievable cutting thickness depends on the material and settings – test new materials on a sample.
What is the working area and material height?
The working area is 914 × 457 mm. The integrated AutoLift base provides a height of up to 220 mm (180 mm in automatic mode). With the standard rails, the included feeder supports material up to 610 × 1,500 mm; additional rails are sold separately.
Which cameras and automation does the machine have?
The machine has four cameras: the SkyView panoramic 16 MP camera, a close-range camera and two side cameras. The ACS workflow includes automatic positioning, LiDAR distance measurement and focus adjustment with AutoLift.
Is the 5W IR module included?
No. According to xTool, the 5W IR module is sold separately – the official EU offer does not list it in the VersaLite or All-in-One bundles either. The module is an optional accessory; we will be happy to check the price and availability for you.
What is the CO₂ cylinder for and is it included?
The CO₂ cylinder (0.6 l) serves the fire suppression system – it is not the laser source. According to xTool, the cylinder is sold separately, but in the current offer xTool adds it to the P3 as a gift – it is part of our delivery. Without an installed cylinder, active CO₂ fire suppression is not available.
What about extraction and ventilation?
The machine does not have a built-in exhaust fan; the package includes the SafetyPro IF2 2.0 inline fan for smoke extraction. As an air purifier, xTool recommends the SafetyPro AP2 Max. The work area must be ventilated and the machine must not be left unattended while working.
What software do I need?
The machine is controlled via xTool Studio for Windows and macOS, connected via USB or Wi‑Fi. Supported formats are SVG, DXF, JPG, JPEG, PNG, BMP and TIF.
What is in the bundle and what can I add?
The All-in-One bundle includes the mobile work stand, the intelligent feeder (150 cm), the RA3 rotary attachment, the SafetyPro AP2 Max purifier and a CO₂ cylinder (a gift according to xTool's current offer) – you don't need to buy any of them separately. Optionally, you can add the Conveyor Rail (69 cm) to extend the feeder. The 5W IR module is not included in the bundle.
Can I try the P3 and how does it differ from the MONOR 7050?
We do not currently have the xTool P3 in our showroom. We will be happy to offer a consultation and a comparison with the available MONOR machines. The P3 is an automated enclosed CO₂ laser with a 914 × 457 mm area; the MONOR 7050 is a professional 80W gantry CO₂ laser with a 700 × 500 mm area for workshop use.
Don't buy blind
Before you buy the xTool P3, we will be happy to check availability, confirm the bundle contents and compare the machine with MONOR CO₂ machines based on your materials and workload.
Write to us – we will advise you on materials, choosing accessories and operation.